<nav id="rhems"><meter id="rhems"></meter></nav>
    <meter id="rhems"></meter>
  • <label id="rhems"></label>
    1. <dd id="rhems"><mark id="rhems"></mark></dd>
      <meter id="rhems"><mark id="rhems"></mark></meter>


      Looking forward to building future with you and common development.

      NEXT:No More
      PREV:No More
      How to choose hotel furniture

      Precautions for purchasing hotel furniture:

      1. Is the hotel furniture material reasonable?

      Different hotel furniture, surface materials are different. For example, the legs of tables, chairs and cabinets require hardwoods, which are relatively strong and can bear the weight, while the internal materials can be used with other materials; the thickness of the large wardrobe legs is 2.5cm, which is too thick and easy to bend. Deformation; kitchen and bathroom cabinets can not be made of fiberboard, but should be used with plywood, because the fiberboard will expand and damage when exposed to water; the dining table should be washable.

      It was found that the wood had insect eyes and foaming, indicating that the drying was not complete. After checking the surface, open the door and drawer door to see if the inner material is rotten. You can use your fingernail to lick it. If you break it in, it means that the inner material is decaying. After opening the door, smell it with your nose. If it is flushed, glaring, or tearing, it means that the formaldehyde content in the adhesive is too high and harmful to the human body.

      2, the wood moisture content does not exceed 12

      The moisture content of hotel furniture must not exceed 12%, the water content is high, and the wood is easy to warp and deform. When the average consumer buys, there is no test instrument. You can take the method of hand touch and touch the bottom of the hotel furniture or the place where there is no paint inside. If you feel the moisture, the moisture content is at least 50%, which cannot be used at all. Another way is to sprinkle a little water on the unpainted wood. If the sputum is slow or not, the water content is high.

      3. Is the hotel furniture structure firm?

      Small pieces of hotel furniture, such as chairs, stools, hangers, etc., can be dragged on the concrete floor when picking, gently falling and falling, the sound is crisp, indicating good quality; if the sound is dumb, there is a murmur, It shows that the blinking is not tightly combined and the structure is not strong. The desk and table can be shaken by hand to see if it is stable. The sofa can sit and sit. If you sit on a move, you will twist and sway. If you shake it, it will be nailed and it will take a long time.

      The square table, the table, the chair and other legs should have four triangular clips, which can be used for fixing. When you choose, you can look over the table and chair. The cloth chair can be touched by hand.

      4. Is the furniture furniture four feet flat?

      This point is flat on the ground and I know that some hotel furniture has only three legs to land. Take a look at whether the table is straight and you can't bow or collapse. The table top is raised, the glass plate is placed on it, and the table top is recessed, and the glass plate is crushed by a pressure. Pay attention to the inspection of the cabinet door. The slit of the drawer should not be too large. It should be straight and straight, and the door should not sag.

      5, veneer hotel furniture seams are not strict

      Whether it is wood veneer, PVC or pre-painted paper, it is necessary to pay attention to whether the leather is flat, whether there is drum, foaming or not.